VMAX V35-857 GROUP U1 12V 35Ah AGM Sealed Lead Acid Battery Upgrades U1

VMAX V35-857 12-Volt 35Ah AGM Deep Cycle High Performance Battery Voltage: 12 Volt Capacity(Amp Hours @20-Hr Rate): 35Ah RC (min): 75 Cold Cranking Amps: 300 Marine Cranking Amps: 390 Terminals: 6mm (included) Dimensions (inches): 7.7"L x 5"W x 6.1"H Weight: 25lb Charging Current: 3A-15A (a smart charger is recommended) Charging Voltage: 14.4V-14.9V Float Voltage: 13.5V-13.8V Features: AGM Electrolyte Suspension System Maintenance free Operation No Dangerous Fumes or Gases Fast Charge Delivery Capabilities Custom Built Military Grade Alloys Extremely Low Self Discharge Rate Approved for Mobile, Maritime and Air Travel Extreme Vibrations, Heat and Weather resistant Sealed, Non-Spillable, Non Hazardous Construction Maximum Power Density and Deep Cycle Capabilities Charging Options: Smart / Microprocessor controlled charger. Alternator: 14V-15V. Solar Panel: 65W-200W. Charge Controller: 7A-30A. Operating Temperature Range: Discharge: -4~140F Charge:     14~140F Storage:     -4~140F Temperature Compensation: Cycle use: -30mV/C per Cell Standby use: -20mV/C per Cell UPC: 760921777961 BCI Group Code: U1 (+ on L.H.S. & - on R.H.S) All VMAXTANKS AGM batteries feature: Sealed Construction The unique construction and sealing techniques of VMAX tanks guarantee leak proof operation in any position with no adverse effect to capacity or service life. VMAX tanks are classified as non-spill able, non-hazardous, dry batteries making them NOT restricted for Surface, Maritime and Air Transport. Electrolyte Suspension system VMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte. No silica gels or any other contaminants are used. Maintenance Free Operation There is no need to check specific gravity of the electrolyte or add water to VMAXTANKS™ during float service life. Reliable, Rugged Construction The extra strong ABS container reduces case bulging and plate warping, ensuring long life and high performance. Low Pressure Valve Regulated System All VMAXTANKS™ are equipped with safety release valves, designed to operate between 0.98-196.1kpa and automatically reseal. Hence, there is never an excessive accumulation of gas within the battery. Heavy Duty Military Grade Grids Heavy duty lead tin alloy grids provide an extra margin of performance and service life in either float or cyclic applications, even after repeated over discharges. Cyclic Service Life VMAX is known to deliver one of the highest numbers of discharge / recharge cycles. Depending on the use and average depth of discharge it can offer an average of: Number Of Cycles Depth of Discharge 300 100% 600 75% 900 50% 1500 25% 3500+ 10% Float Service Life VMAXTANKS™ have an expected life span of 8 to 10 years in float service applications. Low Self Discharge The self discharge rate of the new VMAX tanks at room temperature is approximately 1-2% of rated capacity per month (compared to 2-3% for most other AGM batteries and 15-20% for Lead Acid batteries). Operating Temperature VMAXTANKS™ may be operated over a broad range of ambient temperatures. Ultra Low Resistance VMAXTANKS™ Ultra Low Resistance make it up to 99% efficient (compared to 85-95% as in Lead Acid Batteries and 97% in most other GEL and AGM batteries). Higher Power Density A special assembly technology is used to enhance power density to a considerable level. Don’t settle for an average Lead Acid Battery, upgrade to a VMAX CHARGE TANK premium AGM deep cycle battery

Returns Accepted for this item if it's within 30 Days